SHAFTSTIK® Golf Club Shafting Glass Beads 15g – 0.53oz (10 Clubs)

SHAFTSTIK^® ‘Don’t lose your head’ Golf Shafting Glass Beads

15g – 0.53oz (10 clubs)

SHAFTSTIK Golf Shafting Glass Beads can be added to any of the SHAFTSTIK® two-part epoxies when you have a loose-fitting shaft or wanting to increase the strength of the fit.

By adding a small amount when mixing the epoxy, it will assist in keeping the shaft centered and add to the mechanical and structural strength of the bond.

SHAFTSTIK Golf Glass Shafting Beads are .002” glass oxide granules that are helpful in stabilising and properly centering the shaft in the hosel of the club-head.

SHAFTSTIK Golf Glass Shafting Beads can help increase the viscosity, cushions impact, increases structural and mechanical strength while also reducing shaft tip breakages.

DO NOT exceed 2% to 4% mix ratio of SHAFTSTIK Golf Shafting Glass Beads to SHAFTSTIK® epoxy.

SHAFTSTIK Golf Shafting Beads come in two sizes:

• 15g – 0.53oz –– Suitable for a set of (10 Clubs)
• 112g – 4oz – Suitable for higher volumes of re-shafting. (90 Clubs) Separate Listing

SHAFTSTIK Glass Beads can be added to any of our two-part epoxies when you have a loose-fitting shaft.

By adding a small amount when mixing the epoxy, it will assist in keeping the shaft centered and add to the mechanical and structural strength of the bond.

SHAFTSTIK Glass Shafting Beads are .002” glass oxide granules that are helpful in stabilising and properly centering the shaft in the hosel.

They can help increase the viscosity, cushion impact, increase structural and mechanical strength while also reducing tip breakages.

Features and Benefits:

Increases strength of fit.

Keeps golf shaft centered.

Adds to the mechanical structure to the overall bond.

Stabilises the overall fit.

Cushions Impact

Reduces tip breakage.

Directions:

Add the Glass Beads to the epoxy prior to mixing parts A and B.

Mix two-part epoxy and add a recommended mix ratio of 2% Glass Beads to 98% epoxy.

DO NOT exceed 4% to 96% Epoxy as this may compromise the bond.

DO NOT remix.

Too many glass beads can compromise the bond.  No more than a small pinch is needed.

Follow all Epoxy instructions when mixing.

Safety Guidelines:

Avoid contact with eyes, wash thoroughly if contact is made.

Wash thoroughly with soap and water if contact is made with skin.

If swallowed seek medical advice.

Keep away from children.

Use in accordance with the safety data sheet (provided on request) and/or the guidelines as per the label/s on the product. For further assistance with this product call our helpline on +44 (1952 743 038).

Shelf life and Storage Store in a cool dry place in an airtight container and replace cap straight after use, always keep upright when storing. Follow all the guidelines within the safety data sheet (available on request). If stored correctly this product has a shelf life for a period of 12 months.

About:

The development, manufacturing and engineering of the adhesives, glues, and epoxy resins used spans four decades and three continents, of which is backed up by a high-tech ISO certified production plant and high-grade manufacturing and research and development facility, with expertise of the highest level.

Be sure to check out our ‘SHAFTSTIK® ‘DON’T LOSE YOUR HEAD TWO PART RE-SHAFTING ADHESIVE’ the ultimate solution for re-shafting in conjunction with SHAFTSTIK Golf Glass Shafting Beads for the ultimate bond.